Zirconia Implants

Using Zirconia for UCLA Abutments

UCLA Abutments

 

Why should you choose Zirconia?

 

          Technology is racing ahead faster then anyone could have predicted. If you get caught in the slow lane, it’s only a matter of time before you won’t be able to catch up. New materials are coming out every day it seems and new techniques must be used to fully integrate these materials to get the best of a particular product. PFM’s have been around for decades, they are tried and true, but there is a new material creeping into the market that has had a surprising success in today’s practices.

 

            Zirconia was at first, just used as frameworks, but now with the advancements in technology we are able to provide a highly aesthetic full contour zirconia crown. This was never thought possible even 5 years ago. There are no more gray circles on the occlusal table, no more paying for 4 pennyweights of gold on a molar, and there is no need to order parts.

 

            Customer satisfaction is our number one priority at the lab. By prescribing a UCLA Zirconia Crown you are offering the patient the best of both worlds, high aesthetics, lower cost, and a faster turnaround time. When prescribing a UCLA PFM the patient will end up with a grey circle where the screw channel is and if there is any chipping down the road even more grey will show through. With a UCLA Zirconia crown there will be no grey circle for the access channel because the only gray material is the interface where the crown engages the implant. Our cost to the patient is much lower because the is no need to order a part to cast in gold. The turnaround time is faster because no one has to wait on any parts to arrive and hope they aren’t back ordered or ordered the wrong part.

 

            In the table below is a price comparison between a Zirconia and PFM UCLA crown:

 

 

Zirconia                      PFM

Crown                                            $450                          $179

Implant Chg                                   $120                           $120

Gold                                               N/A                            $200

Parts                                              N/A                             $265

Total                                             $570                            $764

Zirconia – 5 day Turn around

PFM – 10 day Turn around

Introduction to Zirconia

Full contour Zirconia

About

     For years there has been a dedicated search to find an alternative to gold crowns that are both biocompatible and esthetically pleasing for your patient. The advantages of gold crowns have been well demonstrated through millions of case studies, but its biggest disadvantage is its lack of natural tooth coloring and the fluctuations of the gold market. Many patients are now resisting gold crowns because they want a higher esthetic looking crown. They no longer want any of their teeth to be showing gold. Many of the all ceramic restorations available today lack the strength for first and second molars and will often chip or fracture resulting in a remake and wasting everybody’s time.

What is Zirconia

      Zirconia is a relatively new material in the dental market when compared to a gold crown. It is made of 90-95% ZrO2, 4.5-6% Y2O3, <5% HIO2, and <0.5% AI2O3. It is FDA approved as Yttrium Zirconia. Full Contour Zirconia restorations offer flexural strength ranging up to 1200MPa and achieves excellent biocompatibility. These characteristics make Zirconia a great option for a full contour restoration. Current studies conclude the material shows clinically tolerable wear with natural tooth structure.

Types of Zirconia Restorations

      Today there are numerous types of Zirconia restorations and more are coming out each day. They range in translucency and strength, they can be dipped in liquid or colored with a brush. To get the best results you must find what works best for you. The most popular Zirconia crown at the moment is the BruxZir crown. It has a very high flexural strength but not quite the esthetics of the new Prettau Anterior Zirconia crowns. Prettau’s crowns have a 600MPa flexural strength but the have the same translucency as an IPS Emax Crown. There is not one end all be all option for every Zirconia restoration but if you have the right information you can make an informed choice. Since BruxZir crowns range at 1200MPa they are able to span an entire arch without the risk of fracture while the 600MPa rated Prettau crowns are only able to span 3-4 units.

 

If there are any questions on how to make the most out of using Zirconia for your practice you can comment below and send an email to Toothman19@sbcglobal.net